IDEAL FOR MEDIUM AND HEAVY DUTY COMMERCIAL APPLICATIONS.
The electric polymer Salt Dogg spreader is completely self-contained, ultra-durable spreader unit designed for ice and snow control.
Rugged design allows for use with salt or salt/sand mix.
Complete assembly mounts easily on pickup, dump and platform trucks, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.
Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow.
Integrated positive position mount system plus 4-piece ratchet tie-down kit.
No drilling required.
Molded fork slots in hopper makes for easy one man installation and removal; requires extended forks, or lift either series with 4-point tie downs.
Screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate.
Independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.
MATERIAL FLOW/OUTPUT – Salt, 2.2 cu. ft. / minute; Salt-Sand, 1.3 cu. ft. / minute.
Spread width is variable from 5 to 38 feet.
SPINNER CHUTE ASSEMBLY – An 11.5" polymer disc with four fins is connected to a 3/4" diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty poly chute and spinner assembly with an external deflector.
Extra-wide adjustable deflector protects the rear and under carriage of the vehicle, and allows for complete directional spread control and full or compact spread.
Convenient spring-latch locking mechanism allows the spinner assembly to be easily removed for cleaning/storage.
Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with the independently powered vibrator.
Wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50° to -105° C).
In-cab console features independent controls for the auger, spinner and vibrator.
Heavy-duty 12 VDC vibrator, rated at 210 foot pounds for maximum performance.
Includes a heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit.
Overall Length, 92" (requires 77" minimum bed length. Fits all 8' beds and most standard 6' beds); Capacity Struck, 1.45 cu. yd.; Width, 50.5"; Height, 37.5".
